venetian blinds slats cut-down machine
Basic Info
Model No.: TL-800
Product Description
TL-800 25mm Aluminum Slats Venetian Blinds Cut-Down Machine (Pneumatic)
Function:
1. The machine is capable of trimming the finished aluminum venetian blind per customer's window size.
2. The machine is capable of cutting any side of aluminum blind up to 4 inches.
3. The machine is to cut the finished aluminum blind all at once, which means cut through head rail, slats and bottom rail in one cut.
4. Per your choice, the machine is capable of cutting blinds of both 1-inch slat and 2-inch slat.
Specifications:
Slat Cutting Pieces: Maximum about 100 pieces,
Average Cutting Time: Each side takes only about 3 seconds,
Machine Power: 1 HP,
Machine Size: (L*W*H) 70cm*45cm*100cm
Packing Size: (L*W*H) 90cm*80cm*120cm
N.W.: 75 Kg.
G.W.: 125 Kg.
Cutting Operation Steps:
1. Adjust machine to the desired blind length,
2. Select any side of the blind to start cutting,
3. Place the blind on the machine and secure the blind to the machine,
4. Start cutting the selected side of the blind,
5. After finishing cutting one side, repeat step 3 to cut the other side
Product Categories : Various Material Blinds > Blinds Components